
Pixel pitch is the distance, in millimetres, from the centre of one LED pixel to the centre of the next. A P1.2 LED wall has pixels 1.2 mm apart; a P2.5 wall has them 2.5 mm apart. The smaller the number, the more pixels fit in each square metre, the sharper the image looks up close, and the more the wall costs.
Choosing the pitch is the single biggest decision in an LED video wall project. Pick one that is too coarse and people near the screen see dots instead of a picture. Pick one that is too fine and you pay for detail nobody is close enough to notice. This guide explains how to match pitch to viewing distance, how pitch sets resolution and wall size, and what to check for Singapore lobbies, shops, event halls and rentals.
Key takeaways
- Pixel pitch is the gap between pixel centres in millimetres. "P1.2" means about 1.2 mm.
- Manufacturers use different rules for viewing distance. Planar's comfortable estimate works out to about 1.7 m per mm of pitch, Samsung's rule to about 2.4 m per mm, and Planar's 10x rule and Christie's chart to about 3 m per mm.
- Pitch also fixes resolution: a Full HD (1920 x 1080) picture needs a wall 1920 x pitch millimetres wide. At P1.2 that is 2.4 m wide; at P2.5 it is 4.8 m (5.12 m with 640 mm cabinets).
- Indoor walls for lobbies and meeting rooms usually sit between P0.9 and P2.5. Event walls viewed from further away can use coarser pitches, and outdoor screens coarser still.
- A finer pitch is not always better. Match it to the closest regular viewing position, the content and the budget.
What does pixel pitch mean on an LED wall?
Pixel pitch is the centre-to-centre distance between neighbouring pixels on an LED display, measured in millimetres, as defined by Samsung and Planar. Each pixel is a cluster of red, green and blue LEDs, so the pitch tells you how densely those clusters are packed. Product names round it: Hikvision's "P1.2" panel sold by Vue has an exact pitch of 1.25 mm.
Pitch drives three things at once:
- How close people can stand before the image breaks into visible dots.
- Resolution for a given wall size, because a finer pitch packs more pixels into the same width.
- Cost, because more pixels per square metre means more LEDs, more driver hardware and more processing.
You will also see pixel density quoted on spec sheets. It is the same idea from the other direction. Hikvision lists its P1.2 panel at 640,000 dots per square metre, its P1.8 at 284,444 and its P0.9 at 1,137,777.
How far away should viewers be for each pixel pitch?
As a working rule, multiply the pitch in millimetres by 2.5 to 3 to get a comfortable viewing distance in metres. A P1.2 wall looks smooth from about 3 to 4 m; a P2.5 wall from about 6 to 7.5 m. Viewers can stand as close as 1.7 m per mm but may notice pixel texture.
There is no single industry formula, which is why guides online seem to disagree. The main ones are:
- Planar's "comfortable" estimate. Planar's own table gives 1.72 m for a 1 mm pitch and 4.30 m for 2.5 mm, about 1.7 m per mm. Planar calls this a subjective estimate.
- Samsung's rule. Samsung says to equate "1 millimeter of pixel pitch to 8 feet of viewing distance", about 2.4 m per mm. Samsung's example: a sign viewed from 20 feet suits a 2.5 mm pitch.
- Planar's 10x rule and Christie's chart. Pitch x 10 gives an approximate viewing distance in feet (Planar), and Christie's chart uses about 3 m per mm (1.0 mm = 3 m, 2.5 mm = 7.5 m).
- Visual acuity. Planar's figure for a person with 20/20 vision is pitch x 3,438 mm, about 3.4 m per mm. Planar describes this as the distance at which a person with 20/20 vision sees a coherent image that is not pixelated.
Here is what those rules give for common pitches. Figures are in metres, rounded, and calculated from the multipliers above.
| Pitch (exact) | Closest comfortable (~1.7 m/mm) | Samsung rule (~2.4 m/mm) | 10x rule / Christie (~3 m/mm) | Typical use |
|---|---|---|---|---|
| P0.9 (0.9375 mm) | 1.6 m | 2.3 m | 2.8 m | Boardrooms, control rooms, close-up retail |
| P1.2 (1.25 mm) | 2.2 m | 3.0 m | 3.8 m | Meeting rooms, lobbies, showrooms |
| P1.8 (1.875 mm) | 3.2 m | 4.6 m | 5.6 m | Large lobbies, auditoriums |
| P2.5 (2.5 mm) | 4.3 m | 6.1 m | 7.5 m | Halls, stages, atriums |
| P3.9 (3.906 mm) | 6.7 m | 9.5 m | 11.7 m | Event backdrops, large venues |
To use the table, measure the closest spot where people will regularly stand or sit, not the back row. If the front row of a ballroom is 4 m from the stage, P1.2 to P1.8 keeps the picture smooth for them. If nobody comes closer than 8 m, P2.5 or coarser is usually enough.
How does pixel pitch affect resolution and wall size?
Resolution on an LED wall is not fixed like a TV's; it depends on how big you build it. The number of pixels across equals the wall width in millimetres divided by the pitch. So to show Full HD (1920 x 1080) pixel for pixel, the wall must be 1920 x pitch millimetres wide.
Using the cabinet sizes on Vue's Hikvision product pages:
| Hikvision model | Pitch | Cabinet size | Pixels per cabinet | Cabinets for Full HD | Wall size for Full HD |
|---|---|---|---|---|---|
| DS-D4009AW-2FQ | 0.9375 mm | 600 x 337.5 mm | 640 x 360 | 3 x 3 | 1.8 x 1.01 m (about 81 in) |
| DS-D4012CW-2F | 1.25 mm | 600 x 337.5 mm | 480 x 270 | 4 x 4 | 2.4 x 1.35 m (about 108 in) |
| DS-D4018CW-2F | 1.875 mm | 600 x 337.5 mm | 320 x 180 | 6 x 6 | 3.6 x 2.03 m (about 163 in) |
| DS-D4025CS-2F | 2.5 mm | 640 x 480 mm | 256 x 192 | 8 x 6 (2048 x 1152) | 5.12 x 2.88 m (about 231 in) |
This works in both directions. If the wall in your lobby can only be 2.4 m wide and you want Full HD, you need P1.2 or finer. If you have a 5 m stage backdrop, P2.5 already gives you more than Full HD width, so a finer pitch adds cost without adding visible detail for an audience several metres away.
It also explains why fine-pitch walls are used in boardrooms: a P0.9 wall reaches Full HD at about 81 inches diagonal, close to a large flat panel, while staying seamless and expandable.
Which pixel pitch is right for your space?
Start from the closest regular viewing distance, then check that the wall size you can fit gives the resolution your content needs. For most indoor business uses in Singapore that lands between P0.9 and P2.5. Video-led content can go one step coarser than text-heavy slides.
- Boardrooms, control rooms and video conferencing (people 1.5 to 3 m away): P0.9 to P1.2. Fine text, spreadsheets and dashboards stay readable up close.
- Corporate lobbies, showrooms and retail feature walls (2.5 to 5 m): P1.2 to P1.8. Sharp enough for passers-by who walk right up to the screen.
- Auditoriums, ballrooms and atriums (5 m and beyond): P1.8 to P2.5.
- Event stages and exhibition backdrops: P2.5 to P3.9 is common, because the audience is further back and walls are large. Rental cabinets are built for fast set-up; Vue's catalogue includes an indoor rental P2.9 cabinet with a curve lock for curved walls.
- Outdoor screens: coarser pitches (Vue's catalogue lists outdoor module ranges from P4.0 to P10) and much higher brightness to stay visible in daylight.
Content matters too. Video, motion graphics and photos tolerate a coarser pitch than small text. If the wall will show slides with 20-point fonts, err finer; if it will play brand videos, you can usually go one step coarser.
Indoor vs outdoor LED screens: what changes besides pitch?
Outdoor LED screens use a coarser pitch because viewers are further away, but the bigger difference is brightness and protection. Indoor panels like the Hikvision models above are rated at 600 cd/m2 (nits), which suits lobbies and halls. Outdoor screens must compete with direct sunlight, so they are built far brighter and sealed against rain and dust.
For Singapore that means:
- Indoor: pick by pitch and viewing distance; 600 nits is plenty under normal lighting, and too much brightness in a dim room is tiring.
- Outdoor or semi-outdoor (shopfronts facing the street, covered walkways): ask for the outdoor brightness rating and the ingress protection (IP) rating on the datasheet, and plan for heat and humidity. A semi-outdoor spot behind glass that gets afternoon sun may still need more than an indoor panel.
Is a smaller pixel pitch always better?
No. A smaller pitch only helps if people stand close enough to see the difference. Beyond the distances in the table above, same-size P1.2 and P1.8 walls look almost identical, yet the Hikvision P1.2 panel packs 2.25 times as many pixels per square metre (640,000 vs 284,444), so it needs more LEDs and power and costs more.
Other specs often matter more than shaving the pitch:
- Refresh rate. The Hikvision panels above list 3,840 Hz, which helps the wall look stable on camera, important for events and livestreams.
- Contrast. The P0.9 MIP panel lists 10,000:1 and the SMD panels 5,000:1. Higher contrast gives deeper blacks.
- Packaging technology. SMD, GOB (glue on board) and MIP versions exist at the same pitch. GOB adds a protective layer, which helps where people may touch or knock the screen.
- Maintenance access. Front-maintenance cabinets let technicians replace modules from the front, which matters for walls mounted flush against a wall.
Should you rent or buy an LED wall?
Rent if you need the wall for an event, a launch or an exhibition lasting days or weeks; buy if it will run most days in the same place. Rental walls for stages are often coarser than permanent installs because the audience sits further back; Vue's rental catalogue includes indoor cabinets at P1.9 and P2.9. Permanent lobby and meeting-room walls tend to be finer. Still deciding between a screen and projection for an event? See our LED wall vs projector guide.
Before you book either, have these answers ready:
- The closest viewing distance and the size of the wall you can fit.
- What the wall will show (video, slides, live camera feed) and from which source.
- Indoor, semi-outdoor or outdoor, and the lighting in the space.
- How long it must run each day, and who will manage the content.
- For events: set-up and tear-down times at the venue, power available, and whether the wall is curved or flat.
Vue Digital Signage supplies LED video walls for lobbies, retail and events, and offers short-term LED wall rental in Singapore. You can browse the full Hikvision range on the LED solutions page, or contact the team with your space measurements for a pitch recommendation and quote.
Frequently asked questions
What does P2.5 mean on an LED screen?
P2.5 means the pixel pitch is about 2.5 mm: the centres of neighbouring pixels are 2.5 mm apart. Using the rules above, it looks smooth from about 6 to 7.5 m and acceptable from about 4.3 m. It suits halls, stages and atriums rather than small meeting rooms.
What pixel pitch do I need for a meeting room?
Most meeting rooms need P0.9 to P1.2, because people sit 2 to 4 m from the wall and often read small text. A P1.2 wall reaches Full HD at 2.4 m wide, which fits many Singapore boardrooms.
How do I calculate the resolution of an LED wall?
Divide the wall width by the pixel pitch to get the horizontal pixels, and the height by the pitch for the vertical pixels. A 2.4 x 1.35 m wall at 1.25 mm pitch is 1920 x 1080 pixels.
Is an LED wall better than an LCD video wall?
LED walls have no bezels between cabinets and can be built to almost any size and shape, while LCD video walls show thin seams but can cost less for small, close-up walls. The right choice depends on size, viewing distance and budget. Ask for both options if you are unsure.
Talk to Vue about your space: get a recommendation or explore LED video walls.
